US Robotics 56 K SOFTMODEM - COMMAND REFERENCE REV 1 Manual de usuario descargar pdf (Pagina 71)

56K Softmodem

Command Reference

- 63

Table 4-4: +FMM Extended Syntax

+FMR?—Version/Revision Information

This command returns the modem version code. Result codes:

•

This command always yields an OK result code.

Table 4-5: +FMR Extended Syntax

+FPR=<value>—Select FAX Port Rate

This command sets the DTE to DCE FAX port rate. The +FPR command is

supported to ensure compatibility with communications software that issues the

this command.The 56K Softmodem does not maintain the traditional relationship

between the DTE and DCE that this command was designed to control. The 56K

Softmodem interfaces with the host system via a PCI or AC97 interface.

Result codes:

• This command always yields and OK result code.

Table 4-6: +FPR Commands

* The listed values do not have any significance for the 56K Softmodem. The

values listed here are only useful in controller based systems.

Command Description

+FMM, +FMM? Displays the modem product identification.

Command Description

+FMR, +FMR? Displays the modem product identification.

DTE Command* Description

+FPR=0 Select automatic rate detection.

+FPR=1 Set DTE-DCE to 2400 bits/s.

+FPR=2 Set DTE-DCE to 4800 bits/s.

+FPR=4 Set DTE-DCE to 9600 bits/s.

+FPR=8 Set DTE-DCE to 19200 bits/s.

+FPR=10 Set DTE-DCE to 38400 bits/s.

+FPR=18 Set DTE-DCE to 57600 bits/s.

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 107 108

Sin comentarios

US Robotics 56 K SOFTMODEM - COMMAND REFERENCE REV 1 Manual de usuario Pagina 71