US Robotics 56 K SOFTMODEM - COMMAND REFERENCE REV 1 Manual de usuario Pagina 48
- Pagina / 108
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
56K Softmodem
Command Reference
- 42
Table 3-73: +EFRAM Extended Syntax Commands
+ER=<value>—Error Control Reporting
Use this command to turn on or turn off the error control report. If the compression
report is enabled, the +ER:<type> intermediate result code reports the current
DCE-DCE error control type. It is issued after the determination of the error
control protocol and before the final result code (e.g., CONNECT). Specifically,
the +ER intermediate result code is issued after the modulation report (+MCR and
+MRR) and before the data compression report (+DR).
Result codes:
OK if <value> = 0, 1.
ERROR if <value> does not equal 0, 1.
Command Description
+EFRAM=<value 1>,<value 2> Sets the link-layer frame fields size.
+EFRAM? Displays the current maximum link-layer frame field size settings.
+EFRAM=? Displays the supported maximum frame sizes.
- 56K Softmodem 1
- Command 1
- Reference 1
- Contents 3
- Introduction 7
- AT Command Conventions 9
- Basic Syntax Commands 10
- Extended Syntax Commands 10
- S Register Conventions 11
- Other Document Conventions 11
- AT Command Set 13
- Dial Modifiers 15
- TI<value> Commands 17
- ATI11 Command Results 19
- N<value> Commands 21
- Q<value> Commands 22
- &M<value> Commands 28
- Result codes: 31
- \A0 64 characters 32
- \A1 128 characters 32
- \A2 192 characters 32
- -C<value> Commands 38
- +A8T=<sig 42
- >—Send V.8 bis 42
- +A8T Extended Syntax Commands 42
- <max_codewords_tx> 45
- Valid <timed> Values 47
- +MR Extended Syntax Commands 61
- Fax Commands 69
- +FRH Commands 73
- +FRM Commands 74
- Test and Debug AT Command 77
- Result Codes 89
- Result Code Numeric 90
- Description 90
- S-Registers 92
- S-Register Definitions 94
- Default: 7 (00000111b) 98
- Command Reference 104
Relacionado con productos y manuales para Módems US Robotics 56 K SOFTMODEM - COMMAND REFERENCE REV 1
(158 paginas)
(30 paginas)
(44 paginas)
(80 paginas)Hapro TOPAZ10GB manuels
Manuels d'utilisation et guides de l'utilisateur pour Solariums Hapro TOPAZ10GB.
Nous fournissons des manuels en pdf 1 Hapro TOPAZ10GB à télécharger gratuitement par type de document : Fiche technique
Comentarios a estos manuales