US Robotics 56 K SOFTMODEM - COMMAND REFERENCE REV 1 Manual de usuario descargar pdf (Pagina 23)

56K Softmodem

Command Reference

- 17

Result codes:

OK if <value> = 0—1.

ERROR if <value> does not equal 0—1.

Table 3-15: V<value> Commands

Table 3-16:

V<value> Result Code Formats

W<value>—Result Code Option

Use this command to select the modems CONNECT message options. Result

codes:

OK if <value> = 0—2.

ERROR if <value> does not equal 0—2.

Table 3-17: W<value> Commands

X<value>—Extended Result Codes Control

Use this command to select which result codes are used by the modem. The

parameter of this command is stored in bits 4—6 of register S22.

Command Function

V0 Displays result codes as digits. Numerical mode.

V1 Displays result codes as text (default). Verbose mode.

Command Result Code Format

V0 <numeric code><CR>

V1 <CR><LF><verbose code><CR><LF>

Command Function

W0 CONNECT result code reports DTE receive speed. Disables protocol result codes.

W1 CONNECT result code reports DTE receive speed. Enables protocol result codes.

W2 CONNECT result code reports DCE receive speed. Enables protocol result codes (default).

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 107 108

Sin comentarios

US Robotics 56 K SOFTMODEM - COMMAND REFERENCE REV 1 Manual de usuario Pagina 23