US Robotics 56 K SOFTMODEM - COMMAND REFERENCE REV 1 Manual de usuario descargar pdf (Pagina 42)

56K Softmodem

Command Reference

- 36

Table 3-57: Valid <supp_delay> Values

+A8T=<sig-

nal>,<1st_message>,<2nd_message>,<sig_en>,<msg_en>,<supp_delay

>—Send V.8 bis

Table 3-58: +A8T Extended Syntax Commands

+DR<value>—Data Compression Reporting

Use this command to enable or disable the compression report. If the

compression report is enabled, the +DR:<type> intermediate result code reports

the current DCE-DCE data compression type. It is issued after the error control

report (+ER) and before the final result code (e.g., CONNECT).

Result codes:

OK if <value> = 0, 1.

ERROR if <value> does not equal 0, 1.

Table 3-59: +DR Data Compression Report Value

Value Meaning

0 No delay inserted (default).

1 Inserts a 1.5 s delay between transmitted V.8 bis signal and the

subsequent V.8 bis message.

Command Description

+A8T=<signal>,<1st_message>,

<2nd_message>,<sig_en>,<msg_en>,<supp_delay>

Sends a V.8 bis command or message.

+A8T? Displays the current configuration for sending a V.8

bis message or command.

+A8T=? Displays the supported configuration parameters.

Command Function

+DR=0 This command disables the compression report.

+DR=1 This command enables the compression report.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 107 108

Sin comentarios

US Robotics 56 K SOFTMODEM - COMMAND REFERENCE REV 1 Manual de usuario Pagina 42