US Robotics 56 K SOFTMODEM - COMMAND REFERENCE REV 1 Manual de usuario descargar pdf (Pagina 57)

56K Softmodem

Command Reference

- 51

Table 3-95: +IDSR Values

Table 3-96: +IDSR Extended Syntax Commands

+IFC=<DCE_by_DTE>, <DTE_by_DCE>—DTE-DCE Local Flow Control

Use this command to select the local flow control method. The input parameters

of the +IFC command overwrite the settings of the \Q and \X<value> commands.

The reverse is also true. By modifying the settings of the \Q and \X<value>

commands, the +IFC command parameters are overwritten.

Result codes:

OK if <DCE by DTE> = 0—3 and <DTE by DCE> = 0—2.

ERROR if <DCE by DTE> does not equal 0—3 or <DTE by DCE> does not equal

0—2. The following combinations are accepted by the modem.

Table 3-97: +IFC Commands

Commands Description

+IDSR=0 DSR is always on.

+IDSR=1 DSR functions as defined in ITU-T recommendation V.24.

Command Description

+IDSR=<value> Sets how the modem manages DSR.

+IDSR? Displays the current parameter value.

+IDSR=? Displays the available parameter values for the +IDSR command.

Command Data Format

+IFC=0,0 No flow control.

+IFC=1,1 Software flow control.

+IFC=2,2 Hardware flow control (default).

+IFC=3,1 Software flow control with XON/OFF characters passed on to

the remote DCE.

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 107 108

Sin comentarios

US Robotics 56 K SOFTMODEM - COMMAND REFERENCE REV 1 Manual de usuario Pagina 57