US Robotics NETServer/8 Manual de usuario descargar pdf (Pagina 291)

RADIUS Authentication and Accounting E-2

The RADIUS server(s) must be set to the same encryption

key or secret. The encryption key is entered into the

"clients" file for the RADIUS server. The encryption key can

be up to 15 characters long. Refer to your RADIUS

documentation for more information.

set authentication primary_secret <encryption key>

Optional. Set the secondary encryption key or secret.

set authentication secondary_secret <encryption key>

Set the number of retransmissions.

This is the total number of times the NETServer will re-

transmit an authentication request to both the primary and

secondary RADIUS servers.

set authentication retransmissions <count>

Set the time (in seconds) between retransmissions.

set authentication timeout <number_seconds>

Save the changes. Use the following command:

save all

Enabling and Disabling Authentication

You can use CLI commands to enable and disable both RADIUS

and local authentication. By default, both local and RADIUS

authentication are enabled.

Use the following CLI commands to enable and disable

authentication:

enable authentication [local | remote]

disable authentication [local | remote]

1 2 ... 286 287 288 289 290 291 292 293 294 295 296 ... 300 301

Sin comentarios

US Robotics NETServer/8 Manual de usuario Pagina 291