US Robotics NETServer/8 Manual de usuario descargar pdf (Pagina 281)

RADIUS Authentication and Accounting E-1

The address 255.255.255.255 causes the user to be prompted,

while the address 0.0.0.0 causes the server to pick a connection

host from the default host table.

You can use the following CLI command to determine whether

a user's client IP address is negotiated, assigned, or specified by

the user:

set login user <name> host_type [prompt | select | specified]

Note: If you set the user's host type to specified, you must also

specify the host ip address.

Defines the login service the user uses to connect to the host.

Values Telnet

Rlogin

Clear-TCP

Default Telnet

Use the following command to set this parameter locally:

set login user <name> login_service <cleartcp | rlogin | telnet>

This field specifies that the user connect with a specific TCP port

(such as 23, the default Telnet port). This attribute indicates the

TCP port to which the user is automatically connected, when the

Values Decimal value

Default 23

Note: If you change a user's Login-Service, you must also

remember to change the user's Login-Port.

Use the following command to set this parameter locally:

set login user <name> tcp_port <number>

1 2 ... 276 277 278 279 280 281 282 283 284 285 286 ... 300 301

Sin comentarios

US Robotics NETServer/8 Manual de usuario Pagina 281