US Robotics 7931 Guía de usuario descargar pdf (Pagina 38)

14 Sun StorageTek SAM Archive Configuration and Administration Guide • Version 4, Update 6, 04/07

● Use the samcmd(1M) on command.

For eq, specify the equipment ordinal of the automated library as defined in the mcf

file.

You can also perform this task by using samu(1M) or File System Manager.

▼ To Turn Off an Automated Library

Placing a library in the off state stops I/O operations and removes the automated

library from Sun StorageTek SAM control. No automatic movement of cartridges

occurs, and the drives in the automated library remain in the on state. You might

want to turn an automated library off to perform the following tasks:

■ To stop Sun StorageTek SAM operations for this automated library only.

■ To power down the automated library.

● Use the samcmd(1M) off command.

For eq, specify the equipment ordinal of the automated library being addressed as

defined in the mcf file.

You can also perform this task by using samu(1M) or File System Manager.

Loading a Cartridge Into an Automated Library

Loading is the movement of a cartridge from a storage slot to a drive and its

preparation to receive data. Loading occurs automatically when a volume serial

name (VSN) is requested for archiving or staging.

samcmd on eq

samcmd off eq

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 287 288

Sin comentarios

US Robotics 7931 Guía de usuario Pagina 38