US Robotics 7931 Guía de usuario descargar pdf (Pagina 36)

12 Sun StorageTek SAM Archive Configuration and Administration Guide • Version 4, Update 6, 04/07

Automated Library Operations

A number of basic operations are essentially the same for all automated libraries.

This section explains the following:

■ “To Start Removable Media Operations” on page 12

■ “To Stop Removable Media Operations” on page 13

■ “To Turn On an Automated Library” on page 13

■ “To Turn Off an Automated Library” on page 14

■ “Loading a Cartridge Into an Automated Library” on page 14

■ “Unloading a Cartridge From a Drive” on page 15

■ “Labeling a Cartridge” on page 16

■ “To Audit a Volume” on page 17

■ “To Audit a Direct Attached Automated Library” on page 18

■ “Using a Cleaning Cartridge” on page 19

■ “To Clean a Tape Drive” on page 22

■ “To Clear Media Errors” on page 23

■ “To Remove a Stuck Cartridge From a Drive” on page 24

■ “Catalog Operations, Importing Cartridges, and Exporting Cartridges” on

page 25

■ “To Enable Load Notification” on page 30

■ “Using Drives With Encryption Capability” on page 31

▼ To Start Removable Media Operations

Typically, removable media operations commence when a Sun StorageTek SAM file

system is mounted.

● To start removable media operations manually, without mounting any file

systems, enter the samd(1M) start command.

# samd start

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 287 288

Sin comentarios

US Robotics 7931 Guía de usuario Pagina 36