US Robotics USR8550 Manual de usuario descargar pdf (Pagina 7)

Modify a RFC1483 Bridged Connection

1. Select one VPI/VCI pair from the Connection List.

2. Modify the numbers in the VPI and VCI fields and select the

appropriate encapsulation - LLC or VCMUX.

3. Click Modify.

4. Click OK to save the settings.*

Delete a RFC1483 Bridged Connection

1. Select a VPI/VCI pair from the Connection List.

2. Click Delete.

3. Click OK to save the settings.*

Note: After you click OK, you will be prompted to save your settings.

Make sure you are finished making all your changes before you save

your settings. When you are finished making your changes, click Save.

Configure RFC1483 Routed Mode

Select RFC1483 Routed to use a RFC1483 Routed connection mode.

Routing is the act of moving information across a network from a source

to a destination. Along the way, at least one intermediate node is

typically encountered. Routing is often contrasted with bridging. The

primary difference between the two is that bridging occurs at Layer 2 (the

link layer) of the OSI reference model, whereas routing occurs at Layer 3

(the network layer).

The ADSL Modem has eight remote virtual ports on the ADSL interface

and one local port (Ethernet) on the user interface.

The ports on the ADSL interface are described as virtual because they

are associated with the ATM virtual connections configured on the ADSL

line. To establish a connection from any of the remote destinations to the

ADSL modem port, PVCs must be configured end-to-end through the

network.

RFC 1483 Routed Setup

Your DSL service provider will provide you with the values of VPI/VCI to

use after you sign up for the service.

Each PVC comes with the following parameters:

Parameters Description

VPI Virtual path identifier

VCI Virtual circuit identifier

WAN IP

Address

Selected PVC's WAN IP address

WAN Subnet

Mask

Selected PVC's WAN Subnet Mask

LLC

Logical Link Control allows multiple protocol

running over one virtual circuit with a little bit more

overhead.

VCMUX

Virtual Circuit Multiplexer (null encapsulation)

allows only one protocol running per virtual circuit

with less overhead.

Enable

NAPT

Network Address Port Translation allows multiple

computers to share a single WAN IP Address

Check your ISP for the related IP information for the WAN connection

including WAN IP, WAN Subnet Mask, and Default Gateway.

1 2 3 4 5 6 7 8 9 10 11 12 ... 19 20

Comentarios a estos manuales

Sin comentarios

US Robotics USR8550 Manual de usuario Pagina 7

Comentarios a estos manuales

Relacionado con productos y manuales para Redes US Robotics USR8550