US Robotics SureConnect U.S. Robotics SureConnect ADSL Ethernet/USB Router Guía de instalación

0ADSL USB/Ethernet ModemQuick Installation Guide forWindows 95B (OSR2), 98, NT 4.0, 2000, Me, XP (or later), Linux, and Macintosh Operating Systems *E

2424A list will display all interfaces on your system. Locate the ADIModem interface. Once the interface is located, you can configure it using eithe

2828Troubleshooting TipsWindows OnlyNone of the LEDs are illuminated when the ADSL modem is powered on.Check the connection of the power adapter to th

3232I password protected my SureConnection lock and I don’t remember my password.You will need to uninstall the SureConnect Utility and reinstall it i

3636A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and

4040WARRANTIES EXCLUSIVE: IF A U.S. ROBOTICS PRODUCT DOES NOT OPERATE AS WARRANTED ABOVE, CUSTOMER’S SOLE REMEDY FOR BREACH OF THAT WARRANTY SHALL BE

01Printed in XXXXXXXXXXXXXXXXXXXX

1Table of ContentsInstallation Overview & System Requirements ...1What You Need Before You Begin...

1U.S. Robotics Corporation935 National ParkwaySchaumburg, Illinois60173-5157USANo part of this documentation may be reproduced in any form or by any m

1For current product support and contact information, go to the following Web site: http://www.usr.com/broadbandsupportThank you for purchasing the U.

44Windows InstallationStep 1. Connect Microfilters (If Necessary)If there are no microfilters included in your package and your ISP did not provide a

88Connect the Ethernet or USB CableFollow the instructions below for the connection type (Ethernet or USB) you selected in Step 2. Ethernet• Insert

12121. Look for your ISP’s dial-up connec-tion icon and double-click it.2. In the Dial-up Connection screen, enter your user name and pass-word. Your

1616The Encapsulation Type you selected will dictate which components need to be configured. Use the table below to help you identify which components

2020Modem Mode - PPPoE or PPPoA As mentioned previously, when configured to operate in Modem mode, the system software expects you to dial a phone num