US Robotics NETServer/8 Manual de usuario Pagina 116

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 155
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 115
116
show authentication settings
Displays the RADIUS and local User Authentication Settings, which you can
modify using the
set authentication
command.
AUTHENTICATION SETTINGS
Local Authentication is
- ENABLED or DISABLED
RADIUS Authentication is
- ENABLED or DISABLED
Primary Server is
- IP address of the primary RADIUS server
Primary Server Port is -
Port # of the primary RADIUS server
Secondary Server is
- IP address of the secondary RADIUS server
Secondary Server Port is -
Port #
of the secondary RADIUS server
Retransmission Timeout
- interval between retransmissions
Max Retranmissions
- number of retransmissions before failure reported
show clearTCP
or
show clearTCP settings
Displays the clearTCP
connected
message. It can be modified using the
set
clearTCP connected_message
command.
show command
or
command settings
Displays the settings for Command History Depth, Current and Local Prompt,
Login Required and Idle Timeout. See
set command [parameter]
to modify.
Prompts can hold a maximum of
64
characters. For example:
COMMAND SETTINGS:
History Depth: 10
Global Prompt: NETServer>
Local Prompt: NETServer>
Console Login Required: NO
Console Idle Timeout: 5
Current Idle Timeout: 0
Vista de pagina 115
1 2 ... 111 112 113 114 115 116 117 118 119 120 121 ... 154 155

Comentarios a estos manuales

Sin comentarios