US Robotics USR803510 Guía de usuario Pagina 95

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 158
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 94
Revision: 1.00 Copyright 2015 U.S. Robotics Corporation 95 | P a g e
WAN/LAN Switchover Feature
The WAN/LAN switchover feature defines the state of the Ethernet port at power-on. By default, this
feature is enabled. Learn how to disable WAN/LAN Switchover.
Two modes are possible:
WAN mode: the Ethernet interface act as a WAN interface
LAN mode: the Ethernet interface acts as a LAN interface
Each time the unit is powered on:
Gateway sends a DHCP discover message over the Ethernet interface.
When it receives a DHCP offer it proceeds with the DHCP protocol and the Ethernet interface
remains in WAN state.
When it does not receive a DHCP offer it resends the DHCP discover message five times. If no DHCP
offer is received after five tries, the gateway starts running a DHCP server on the Ethernet interface
and act as a LAN interface.
TIP: WAN/LAN detection only happens during power on. The Ethernet connection remains in the same
state (WAN or LAN) until a power cycle or reset has happened.
Vista de pagina 94
1 2 ... 90 91 92 93 94 95 96 97 98 99 100 ... 157 158

Comentarios a estos manuales

Sin comentarios