US Robotics USR803510 Guía de usuario Pagina 38

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 158
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 37
Revision: 1.00 Copyright 2015 U.S. Robotics Corporation 38 | P a g e
Default Policies
The Default Policies section sets the basic firewall rules.
Default Policies
Sets the default firewall rules to accept or reject data flow between the following interfaces:
o LAN to WAN
o LAN to LAN
o LAN to LOCAL
o WAN to LOCAL
Sets the action for each rule:
o Accepted: the data is allowed to pass from one interface type to the other interface type.
o Rejected: the data is not allowed to pass form one interface type to the other interface type; the
gateway drops the data packets and sends a reject message to the source of the packets.
o Dropped: the data is not allowed to pass from one interface type to the other interface type; the
gateway drops these data packets without sending a reject message.
NOTE: The WAN to LOCAL traffic is by default "Dropped". This makes sure that no traffic coming from
the Internet can enter the gateway.
Vista de pagina 37
1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 157 158

Comentarios a estos manuales

Sin comentarios