US Robotics Instant802 APSDK Manual de servicio Pagina 173

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 328
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 172
Professional Access Point
Administrator Guide
Upgrade - 173
firmware on your devices to take advantages of new features and enhancements.
To upgrade the firmware on a particular access point:
1. Navigate to Advanced menu’s Upgrade tab on the Web User Interface for that access point.
Caution
Do not upgrade the firmware from a wireless client that is associated with the access point you are
upgrading. Doing so will cause the upgrade to fail. Furthermore, all wireless clients will be disassoci-
ated and no new associations will be allowed.
If you are reading this section because you already tried to upgrade the firmware through a wireless
client, use a wired client to regain access to the access point as follows:
Create a wired Ethernet connection from a PC to the access point.
Open the Web User Interface.
Repeat the upgrade process using with the wired client.
Caution
The upgrade process may take several minutes during which time the access point will be unavailable.
Do not power down the access point while the upgrade is in process. When the upgrade is complete,
the access point will restart and resume normal operation.
Note
You must upgrade firmware for each access point; you cannot upgrade firmware automatically across
the cluster.
Vista de pagina 172
1 2 ... 168 169 170 171 172 173 174 175 176 177 178 ... 327 328

Comentarios a estos manuales

Sin comentarios