US Robotics 3Com Manual de usuario Pagina 85

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 101
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 84
TECHNICAL REFERENCE
8-34
+FTM=n Transmits data using the modulation specified by n.
(n = 3, 24, 48, 72, 96, 97, 98, 121, 122, 145, or 146)
Note: See the “Screen Messages” table at the end of this section
for an explanation of messages that appear in response
to this command.
+FRM=n Receives data using the modulation specified by n.
(n = 3, 24, 48, 72, 96, 97, 98, 121, 122, 145, or 146)
Note: See the “Screen Messages” table at the end of this section
for an explanation of messages that appear in response
to this command.
+FTH=n Transmits data framed in the HDLC protocol using
the modulation specified by n.
(n = 3, 24, 48, 72, 96, 97, 98, 121, 122, 145, or 146)
Note: See the “Screen Messages” table at the end of this section
for an explanation of messages that appear in response
to this command.
+FRH=n Receives data framed in the HDLC protocol using
the modulation specified by n.
(n = 3, 24, 48, 72, 96, 97, 98, 121, 122, 145, or 146)
Vista de pagina 84
1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 100 101

Comentarios a estos manuales

Sin comentarios